how do you make the paint extinguisher? is it as easy as filling it up with paint? or do you mix it with the foam stuff?
Who approved this? Anyway: You need an old-school fire extinguisher. The silver ones work only. There's already a post about it in the Step-Bi-Step thread, I believe. So check that out, and you should probably find it.
you can use any extinguisher if its the more common red small one you just unscrew the top fill it up and pressurize it with a bike pump with the valve under the gauge on the side of the handle
It's pretty easy, and fuck all the how to sites and all that bullshit. 1. Acquire a silver one, with a black hose. 2. Shoot out all the shit inside of it. Make sure you get all of it out. 3. Unscrew top, and clean inside out. 4. Fill up a little more than 1/3 of the Fire Exstinguisher with bucket paint. 5. Fill up a little more than 1/3 with water. 6. Take a ride to the gas station, and use the air pump to fill up with air. If the pop is broken, it usually takes about the entire time the pump is on. 7. HAVE FUN! Make a mess! Wear shitty clothes and shoes.
Just mix the paint and water 1:1 before you put it in the extinguisher. Saves a lot of time that would be spent on shaking up a huge metal cylinder
people are so dumb, if anything filling a fire extinguisher with paint is common sence you open it, you obviously thin the paint so its able to move through the valve and the hose..and then you close it and fill it back up with air fuck! and hell followed with is straight, cool dudes...not a big fan of their music though
IIRC, you can just unscrew the top and fill that bitch (make sure it's not pressurized) Then, there should be a schrader valve on the top you can pump air in with any bike pump or air compressor